IBM eServer 240 xSeries User Reference Manual page 145

Result Test-specific string
Failed The Self-diagnostic failed for device n on adapter m
where n is the number of the device and m is the adapter number.
Action: Refer to the documentation provided with the tape drive.
If the problem persists, have the system serviced.
Failed The unload/eject pushbutton test failed for device n on adapter m
where n is the number of the device and m is the adapter number.
Action: Refer to the documentation provided with the tape drive.
This test is applicable only to SCSI tape drives that have a pushbutton. If the
problem persists, have the system serviced.
Failed The unload/eject test failed for device n on adapter m
where n is the number of the device and m is the adapter number.
Action: Refer to the documentation provided with the tape drive.
If the problem persists, have the system serviced.
Function: keyboard messages (301)
Result Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed On system board keyboard test failed
Action:
1. Replace the keyboard.
2. If the problem persists, replace the keyboard cable.
If the problem persists, have the system serviced.
Function: pointing device (mouse) messages (302)
Result Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed On system board pointing device test failed
Action: Replace the pointing device (mouse).
If the problem persists, have the system serviced.
Function: Ethernet messages (405)
Result Test-specific string
Note: If you receive any diagnostic error messages that are not shown in this table, make sure that
your server has the latest levels of BIOS, Advanced System Management Processor, and diagnostics
microcode installed. If the problem persists, have the system serviced.
Failed In PCI slot n
where n is the number of the PCI slot where the failing Ethernet adapter is installed.
Action: Replace the Ethernet adapter in slot n. If the problem persists, have the
system serviced.
Failed On system board
Action: Have the system serviced.
Chapter 6. Solving problems
135