Timer Settings - Ricoh DSm415 Operating Instructions Manual

Timer Settings

❖ ❖ ❖ ❖ Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
"Auto Off".
The machine status after the Auto Off operation is referred to as "Off mode",
or "Sleep mode". For the Auto Off Timer, specify the time to elapse before
Auto Off.
Note
❒ Default: 1 min.
❒ The time can be set from 1 to 240 minutes using the number keys.
❒ From "Off mode" or "Sleep mode", the machine is ready to use within 10
seconds.
❒ Auto Off may not work when error messages appear.
❖ ❖ ❖ ❖ Energy Saver Timer
The machine automatically enters Low Power mode automatically after a job
is finished, and the selected time elapsed.
Note
❒ Default: 1 min.
❒ The time can be set from 1 to 240 minutes using the number keys.
❒ Energy Saver may not work when error messages appear.
❒ The machine automatically prints any fax or printer data received while in
Energy Saver mode.
❖ ❖ ❖ ❖ System Auto Reset Timer
The System Reset setting automatically switches the screen to that of the func-
tion set in Function Priority when no operations are in progress, or when an
interrupted job is cleared. This setting determines the system reset interval.
See p.28 "Function Priority".
Note
❒ Default: On, 60 sec.
❒ The time can be set from 10 to 999 seconds in 1 second increments using
the number keys.
Settings You Can Change with User Tools
3
31