Operating Systems With Acpi - Fujitsu Siemens Computers Lifebook E Series Easy Manual

Energy saving functions
Save to Disk
The active data can only be saved if sufficient space is available on the hard disk (at least the main
memory size +16 Mbytes). If the Windows NT or OS/2 Warp operating system is installed, a FAT
partition with this space must be created as a drive on the hard disk (see the manual for the
respective operating system).

Operating systems with ACPI

(Windows 98, Windows ME, Windows 2000 und
Windows XP)
For operating systems with ACPI you can set the energy-saving functions under Settings -
i
Control Panel - Power Management (e.g. Standby, Hibernate mode and LCD off).
A programme to configure the energy saving functions is available in the Start – Settings –
Control Panel section of you operating system. For further information on the options
available, please refer to your operating system help files.
Settings for energy-saving functions in the BIOS Setup are not taken into account by
operating systems with ACPI.
Changing settings
Ê
Double-click on the My Computer symbol.
Ê
Double-click on the Control Panel symbol.
Ê
Double-click on the Power management symbol in the Control Panel window.
The Properties dialogue field appears.
Ê
Adjust the setting to your needs.
Ê
Click on OK to save the settings.
With Windows 2000 and Windows ME the default setting for Hibernate mode is Disabled.
i
In Windows 2000/ME the required memory space on the hard disk is not reserved until
you make the required Hibernate mode settings under Settings - Control Panel - Energy
Options.
Additional information on this service programme is contained in your operating system help files.
48
Operating systems with ACPI
A26391-K114-Z120-1-7619