Operating Systems With Acpi (Windows Me And Windows 2000); Phdisk (For Windows 98 And Windows Nt) - Fujitsu Siemens Computers LIFEBOOK B Series Operating Manual

Hide thumbs Also See for LIFEBOOK B Series:

Table of Contents

Energy saving functions

Operating systems with ACPI (Windows ME and

Windows 2000)

For operating systems with ACPI you can set the energy-saving functions under Settings –

Control Panel – Power Management (e.g. Standby, Hibernate mode and LCD off).

Settings for energy-saving functions in the BIOS Setup are not taken into account by

operating systems with ACPI.

Changing settings

Double-click on the My Computer symbol.

Double-click on the Control Panel symbol.

Double-click on the Power management symbol in the Control Panel window.

The Properties dialogue field appears.

Adjust the setting to your needs.

Click on OK to save the settings.

Additional information on this service programme is contained in the help function of Windows 98

and Windows 2000.

The PHDISK service programme reserves the memory space required for the use of the Save-to-

Disk mode. The programme creates a file for saving the main memory contents and the system

position of the first and last free sectors is saved in the "CMOS" after running this programme.

Run PHDISK after you have installed or removed memory modules.

Run PHDISK after you have installed or restored Windows 98 or Windows NT.

Run PHDISK after you have replaced your hard disk.

Run PHDISK if you have received a BIOS error message in conjunction with the Save-to-

Disk mode during the self test (POST).

In Windows NT the PHDISK service programme is not supported by the NTFS file system.

In Windows 2000 the required memory space on the hard disk is not reserved until you

make the required Hibernate mode settings under Settings - Control Panel - Power

Management.

Connecting external audio devices

A26391-K105-Z120-1-7619

Table of Contents