Fujitsu Siemens Computers Lifebook E Series Easy Manual page 68

Troubleshooting and tips
Press <F1> to resume, <F2> to SETUP.
This error message appears if an error occurs during the self-test before starting the operating
system.
Ê
Press the [F1] [F1] function key to start the operating system.
[F1] [F1]
Ê
Enter the BIOS Setup programme by pressing [F2]
Previous boot incomplete - Default configuration used
Due to an error during the previous system boot, default values were used for certain settings.
Check the BIOS Setup and the settings.
Ê
Press the [F1] [F1] function key when prompted to do so. [F1] [F1]
Real Time clock error
Ê
Contact your sales outlet or our Hotline/Help Desk.
nnnnK Shadow RAM failed at offset: xxxx Failing Bits: zzzz
Ê
Contact your sales outlet or our Hotline/Help Desk.
System battery is dead - Replace and run SETUP
Ê
Contact your sales outlet or our Hotline/Help Desk.
System cache error - Cache disabled
Ê
Contact your sales outlet or our Hotline/Help Desk.
nnnnK System RAM failed at offset: xxxx Failing Bits: zzzz
Ê
If you have installed a DIMM, you should remove the module and reboot the notebook.
If the error message is no longer displayed, the error concerned is DIMM-related. Should you
receive this error message again, please contact your dealer.
System timer error
Ê
Contact your sales outlet or our Hotline/Help Desk.
60
[F2].
[F2] [F2]
A26391-K114-Z120-1-7619