Set Mode Items - Icom IC-M87 Instruction Manual

■ SET mode items

D Beep tone function "bP"
You can select silent operation by turning the beep tones
OFF, or you can have 2 types of confirmation beeps sound at
the push of a switch. When ON is selected, a fixed beep (Pi)
sounds and when US is selected, the preset beeps (e.g. do,
re, mi) sound.
PUSH
Beep tone ON (default)
D Priority scan function "Pr"
The transceiver has 2 scan types—normal and priority scans.
Normal scan searches all tag channels in the selected chan-
nel group. Priority scan searches all tag channels in sequence
while monitoring Channel 16.
PUSH
Normal scan (default)
D Scan resume timer "St"
The scan resume timer can be set as a pause (OFF) or timer
scan (ON). When OFF is selected, the scan pauses until a
received signal disappears. When ON is selected, the scan
pauses for 5 sec. after receiving a signal and then resumes
even if the signal has been received.
User Beep
Scan resume timer OFF
(default)
D Auto scan function "AS"
The Auto scan function starts the desired scan automatically
when no signal is received, or no operation is performed for
30 sec.
Priority scan
Auto scan OFF (default)
SET MODE
PUSH
Scan resume timer ON
PUSH
Auto scan ON
8
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
18