Attach the Front Wheel
!
Failure to properly tighten the nuts holding the wheels
onto the tricycle may result in poor riding performance,
the tire falling off and serious injury or death . Be sure
the wheels are securely attached to the frame before
using the tricycle .
Parts: Front wheel, main frame assembly
Hardware: 2 large nuts
Tools: 15 mm open and box end wrench,
Adjustable Pliers
1 . Place the front wheel into the fork openings .
Be sure both sides of the axle rest on the
metal and the wheel is centered .
2 . Place the nut on the axle and loosely tighten .
3 . Place the remaining nut on the opposite side and
loosely tighten .
4 . Tighten each nut until both are firmly
set, a minimum of 20 ft lbs (240 in-lb).
5 . Inspect the wheel for even rotation .
17
WARNING!
Before proceeding to the next step,
lift and rotate the tricycle .
2
3
1