Attach The Front Wheel - Schwinn Meridian Owner's Manual

Attach the Front Wheel

WARNING!
!
Failure to properly tighten the nuts holding the wheels
onto the tricycle may result in poor riding performance,
the tire falling off and serious injury or death . Be sure
the wheels are securely attached to the frame before
using the tricycle .
Parts: Front wheel, main frame assembly
Hardware: 2 large nuts, 2 washers
Tools: 15 mm open and box end wrench,
Adjustable Pliers
1 . Loosen nuts on the front wheel axle .
2 . Place the front wheel axle in the fork drop-outs,
making sure the wheel is centered .
3 . Tighten nuts to 240in-lbs.
4 . Tighten fender hardware, making sure the tire does
not rub on the fender .
17
Schwinn Meridian Manual R3 0918112 .indd 17
Before proceeding to the next step,
lift and rotate the tricycle .
2
3
1
9/18/12 3:44 PM