Schwinn Adult Tricycle Owner's Manual page 19

4 . Position the front fender so the attachment bar is
on the inside of the main frame, and aligns with the
threaded screw hole of the fork .
5 . Place a washer on the large screw and slide it
through the attachment bar, and into the threaded
hole in the fork .
6 . Align the fender braces with the small hole on the
ends of the fork .
7 . Loosely screw the fender braces to the fork .
Note: The fender will be positioned and firmly fastened
after the front tire is attached .
6
3
Decal should be
on the outside of
the frame .
7
5
4
16