Set Handset Ringer - VTech GZ5838 User Manual

Telephone operation

Set handset ringer

There are many ring tones to choose from . To hear a sample of each and change the ringer
setting:
 . Make sure the handset is in idle mode .
2 . Press PROG .
until the screen displays RINGER: and the current setting .
3 . Press or
4 . Press SEL. The current setting blinks, and you will hear a sample of the ring tone .
The screen will display:
5 . Press or to hear samples of all of the available ring tones .
6 . Press SEL to choose the desired ring tone .
7 . Press or to adjust the volume level .
8 . Press SEL to confirm the volume setting, you'll hear a confirmation beep.
RINGER: Rotary
www.vtechphones.com
• If the ringer volume
is set to off, the
telephone will not
ring during an
incoming call but
the CHARGE/IN
USE indicator will
flash. The screen
will display
RINGER OFF and
a ringer off icon
will be shown .
• To turn the ringer
off, press and
hold or in idle
mode, then press
until handset
screen displays
RINGER OFF. The
ringer off icon
will display .