Table of Contents
Advertisement
Properties Window
Port Page
Use this page to configure the parameters of the ports. Click on a
radio button in the "Port Selection" section to select the port to be
configured and then select the properties from the configuration
section. You can set other ports to the selected configuration by
using the "Apply to other ports..." button.
Port Selection
Select a port to set its configuration.
Address Learning
Enables the source MAC address of packets arriving at this port to
be learned.
Broadcast Storm Control
If the number of broadcast packets in the input buffer is over the
threshold, new incoming packets will be discarded until the the
number has been reduced to below the threshold.
C
ONFIGURING THE
S
F
WITCH
ROM THE
C
P
ONSOLE
ORT
17
Advertisement
Table of Contents
