SMC Networks SMC-EZ1026DT User Manual page 18

A EZ S
BOUT THE
LED
SMC-EZ1026FMSC
LINK/
ACT
SMC-EZ1026T Module Ports
LINK/
ACT
FDX/
COL
6
10/100
WITCH
Module Port Status LEDs
Condition Status
Off The port has not established any network
connection.
On The port has established a valid 100 Mbps
network connection.
Flashing Traffic is passing through the port.
Off The port has not established any network
connection.
On Yellow The port has established a valid network
connection and communications have been
set to 10 Mbps.
On Green The port has established a valid network
connection and communications have been
set to 100 Mbps.
Flashing Communications have been set to 10 Mbps
Yellow and traffic is passing through the port.
Flashing Communications have been set to 100 Mbps
Green and traffic is passing through the port.
On The port is in full-duplex mode.
Off The port is in half-duplex mode.
Flashing Packet collision is occuring in half-duplex
mode.