Manual Feeding (Bypass Mode) - Canon CR-180 Instructions Manual

Check reader

Hide thumbs Also See for CR-180:

Table of Contents

Scanning starts.

If the documents are large, the documents may fall over while they are being fed. If

this happens, attach the document feed guide to prevent the documents from falling

Note

over.

If "Sort Method" is set in the software application, the document will be ejected to

one of the two eject pockets according to the separation conditions that have been

set.

Eject Pocket 2

Manual Feeding (Bypass Mode)

Use the Bypass (manual) mode to scan duplicate forms which have sticky edges

or documents that have a rough surface. Feed these documents one by one and

press Bypass Mode button.

For duplicate forms, load the side with the sticky edges toward the feeding entry point.

Important

4.2 Document Feeding and Scanning

Document Feed Guide

Flapper

Separates documents

Eject Pocket 1

Bypass Mode Button

Table of Contents

Show Quick Links

Table of Contents

Do you have a question about the CR-180 and is the answer not in the manual?