Usb Connections; N Usb 2.0 Interface Cards - Canon CR-180 Instructions Manual

USB Connections

Connect the scanner to the computer.
To connect the scanner with a USB interface cable, you will need the following items
that are not included in the package.
Important
G USB interface cable
Use an interface cable that supports a Hi-Speed USB 2.0 connection.
G USB interface card
Use an extended USB interface card that is compatible with a Hi-Speed USB 2.0
connection, and has been operationally tested by Canon.

N USB 2.0 Interface Cards

Be sure to use one of the recommended USB 2.0 interface cards when
connecting the scanner with a USB interface cable. The recommended USB 2.0
interface cards are listed below.
Recommended USB 2.0 interface cards
Manufacturer: Adaptec
Product: USB 2 Connect 2000LP (AUA-2000)
USB 2 Connect 3100 (AUA-3100LP)
USB 2 Connect 5100 (AUA-5100)
USB 2 Connect for Notebooks (AUA-1420)
G Be sure to follow the installation procedure in your computer's operation manual
when installing the USB 2.0 interface card in your computer.
Important
G Use the most recent USB 2.0 driver provided by Adaptec or Microsoft.
G Windows 95/NT operating systems do not support USB. Use a SCSI cable to connect
the scanner to computers using Windows 95/NT operating systems.
G If you need to use a USB hub, use one that supports USB 2.0.
G This scanner has passed the Hi-Speed USB 2.0 verification test. However, it may not
function properly even when Hi-Speed USB 2.0 is built-in to a computer as standard.
G Scan speed may slow down when Hi-Speed USB 2.0 is not supported.
2.2 Connecting the Scanner to a Computer
2
19