Canon CR-180 Instructions Manual page 46

Chapter 4 Document Feeding and Scanning
3
If the documents are not aligned, press [Jog].
The jogger mechanism can be used to align documents.
If you press [Jog] when a batch of documents of various sizes are loaded, the
alignment will be incomplete, and the documents will not be scanned in the order
Important
loaded. If you are scanning documents of various sizes, align the leading edges of
all the documents with the entry point of feeding.
G The jogger vibrates for 10 seconds and then stops. Press one of the operation
Note
G If the documents are large, the documents may fall over while they are vibrating.
4
Instruct scanning to start from the software application.
If the feed setting in the software application is "Panel-Feeding", press [Start] to
start scanning.
Note
42
buttons to stop the jogger.
If this happens, attach the jogger support to prevent the documents from falling
over.
Start Stop
Jog
Jogger Support