Test Menu; Starting Test Menu Operation; Test Page Print (Testprint Submenu) - TallyGenicom 8108N User Manual

TallyGenicom 8108N Color Laser Printer User Guide
8.3

Test Menu

8.3.1

Starting Test Menu Operation

You can start Test Menu operation according to the procedure below.
Procedure
1. Ensure that "Ready" is displayed
2. Press ONLINE key. The
3. Press TRAY key to select the input
4. Press MENU key, and Test Menu is
8.3.2

Test Page Print (TestPrint Submenu)

This submenu prints the test pattern (Test Page) on the printer under the
following conditions:
Input tray: The input tray displayed in the upper line of the LCD takes pre-
Media size: The Test Page fits media size in the input tray, and it is printed
Media type: This setting is determined by TestMode submenu (page 8-16).
8-8
on the LCD.
ONLINE lamp goes out when the
printer enters offline mode.
tray for printing with Test Menu.
activated.
cedence. If the Media type setting is TRANS, LABEL,
THICK1, THICK2, ENV1, or ENV2, Tray 1 will be selected.
automatically. If the media size is smaller than B5 size, the Test
Page will be partially printed.
Tray2: B5
Ready
Tray2: B5
Not Ready
Tray1: A4
Not Ready
Tray1: A4
Test Menu