Table of Contents
Advertisement
3.3
Adjusting Paper Feeder
3.3.1
Adjusting Left and Right Margins
If the test printout is biased horizontally, adjust the left and right margins using
the utility function of the control panel.
Procedure for adjusting the left and right margins
1.
2.
3.
4.
5.
6.
Perform test print (see Chapter 8.3.2, "Test Page Print (TestPrint Sub-
menu)").
If you intend to adjust the paper tray of the Paper Feeder (tray2), perform
test print on plain paper fed from tray2.
Measure left margin A (mm) and right margin B (mm) on the printed test
pattern.
Determine the setting according to the table below.
B-A (mm)
-3.5
-3
-2.5
Setting
-35
-30
-25
Ensure that "Ready" is displayed
on the LCD.
Press ONLINE key. The
ONLINE lamp goes out when
the printer enters offline mode.
Press MENU key. Keep pressing
MENU key for three seconds.
Utility Menu appears after Test
menu appeared.
A
Printed
Image
-2
-1.5
-1
-0.5
0
+0.5
-20
-15
-10
-5
0
+5
Tray 1: A4
Ready
Tray 1: A4
Not Ready
Tray 1: A4
Utility Menu
Adjusting Paper Feeder
B
+1
+1.5
+2
+2.5
+3
+3.5
+10
+15
+20
+25
+30
+35
3-7
Advertisement
Table of Contents
