Canon MX920 Series Online Manual page 50

Entering Numbers, Letters, and Symbols
The machine allows you to enter characters by selecting them from an on-screen character list when
registering information, such as unit name, a recipient's name for coded speed dial, etc.
Switching the Input Mode
The machine has three input modes: lowercase mode, uppercase mode, and numeric mode. When you
press the center Function button (Aa1), the input mode is switched in the following order: lowercase mode,
uppercase mode, then numeric mode.
Note
For unit telephone number entry or fax/telephone number entry for coded speed dial, only the
numbers and symbols available for that type of entry are displayed on the screen.
Entering Numbers, Letters, and Symbols
Press the , , , and button (A) to select the character, then press the OK button (B).
To enter a space, select Space.
To delete the last character you entered, press the right Function button to select Del. character.
After all characters are entered, press the left Function button to select Done.
Editing Entered Numbers, Letters, and Symbols
To edit entered characters, press the or button to select the entry column (C).
Press the or button to move the cursor under the position you want to edit.
To insert a space