Canon MX920 Series Online Manual page 29

The notification is sent automatically to the registered e-mail address when the printing or
service maintenance starts.
4. In the Printer Owner Registration window, enter the information shown below, and
click Next
User Name
Enter any name.
The name that you enter is displayed at login.
Important
The maximum number of characters that can be entered is 30.
Language
Select the language that you are using.
The language that you select is used in notification e-mails such as print start notices.
Time Zone
Refer to this section, and select the standard time of the city that is nearest to the region where you
live.
Date/Time Display Format
Select the format of your choice. The format that you select is applied to the date/time information in
the screens and notification e-mails of this service.
Daylight Saving Time
This setting is combined with the Time Zone setting, and applied to the date/time information in the
screens and notification e-mails of this service.
When you select ON, 1 hour is added to the Time Zone setting when the date/time information is
displayed.
5. In the Printer Registration window, enter the Printer Name, and click Confirm
Enter any name that will allow you to identify the printer.
Important
The maximum number of characters that can be entered is 30.
6. In the Confirm Owner Registration window, check the registration information,
and then click Register
A temporary password will be displayed.
Important
The temporary password that appears is not included in the notification e-mail.Be sure to write
down the temporary password before closing the screen.
Check if an E-mail Has Been Sent to the E-mail Address You Entered
A URL is notified to complete the registration to the e-mail address that for the registered printer's owner.
Access the URL in the E-mail and Complete the Printer Registration
1. Access the URL provided in the e-mail
Important
You have to complete the registration within 30 minutes.
2. Enter the registered e-mail address of the printer's owner, the temporary password,
and click Log In