Changing The Settings In The Wireless Lan Sheet - Canon MX920 Series Online Manual

Changing the Settings in the Wireless LAN Sheet

To change the wireless network settings of the printer, connect the printer and the computer with a
USB cable temporarily. If you modify the wireless network settings of the computer over wireless
connection without USB connection, your computer may not be able to communicate with the
machine after modifying the settings.
Note
This screen is not available depending on the printer you are using.
Activate the wireless LAN setting of the printer to change the settings in the Wireless LAN
sheet.
1. Start up IJ Network Tool.
Starting up IJ Network Tool
2. Select the printer in Printers:.
When the printer is connected to the computer with a USB cable temporarily, select the printer
with "USBnnn" (where "n" is a number) appearing in the Port Name column.
3. Select Configuration... from the Settings menu.
4. Click the Wireless LAN tab.
The Wireless LAN sheet is displayed.
For details on the Wireless LAN sheet, see
5. Change the settings or confirm.
SSID:
Enter the same value that was set for the target access point.
When the printer is connected with USB, the Search screen appears by clicking Search.... Set
the SSID of the access point by selecting the one of the detected access points.
Search Screen
Note
Enter the same SSID that the access point is configured to use. The SSID is case-
sensitive.
Wireless LAN Sheet.