Canon MX920 Series Online Manual page 173

Select ON to correct red eyes in portraits caused by flash photography.
Depending on the type of the photo, red eyes may not be corrected or parts other than the eyes may
be corrected.
Disc label print setting Screen
The Set disc print area screen is displayed, and you can perform settings for printing on a printable disc
from a PictBridge compliant device.
Follow the procedure below to perform disc label print setting.
1. Adjust the printing area (the outer/inner diameter of the printable disc).
Note
Measure the outer and inner diameters of the printing surface of the printable disc and make
sure you set a value smaller than the measured value for the outer diameter, and a value larger
than the measured value for the inner diameter.
Contact the manufacturers of printable discs for details.
2. Select the type of the printable disc you use.
Note
If your printable disc is the recommended disc, specify Recommended disc for the suitable
density printing. If not, specify Other disc.