Confirming That The Power Is On - Canon MX920 Series Online Manual

Confirming that the Power Is On

The lamp on the mode button or MENU button is lit blue when the machine is turned on.
Even if the LCD is off, if any lamp on these buttons is lit, the machine is on.
Note
It may take a while for the machine to start printing immediately after you turn on the machine.
The LCD will turn off if the machine is not operated for about 5 minutes. To restore the display, press
any button except the ON button or perform the print operation. The display will be also restored
when receiving faxes. You cannot change the wait time before the LCD turns off.