Setthe Timer; Poweroutage - GE JTP10GP Use And Care Manual

OvenControl,ClockandTimer
Clock
The clockmust be set for the
automaticoventimingfunctions
to workproperly.The timeof day
cannotbe changedduringa TIME
BAKEor CLEANcycle.
To Set the Clock
Step 1.
Press the CLOCKpad.
Step
2.Press
INCREASE or
DECREASE padto setthetimeof
day.
Power Outage?
After a poweroutage,when
poweris restoredthe displaywill
flash and time shownwill no
longerbe correct-for example,
after a 5-minutepowerinterruption
the clockwill be 5 minutesslow.
The displayflashesuntilthe clock
is reset.All otherfunctionsthat
were in operationwhenthe power
wentout will haveto be
programmedagain.
Timer
Thetimerdoesnotcontroloven
operations. Themaximum settingon
thetimeris 9 hoursand55minutes.
To Set The Timer
Step 1.
Press the TIMERON/OFF
pad.
Step 2. Press INCREASEor
DECREASEpad to set the amount
of time on timer.
The timer will start automatically
withina few secondsof releasing
the pad.
The timer,as you are settingit,
will displaysecondsuntil 60
secondsis reached.Then it will
displayminutesand secondsuntil
60 minutesis reached.
After 60 minutes,it will display
hours("HR"now appearsin
display)and minutesuntilthe
maximumtime of 9 hours and
55 minutesis reached.
To Reset Timer
PressTIMERpadandthenpress
INCREASE or DECREASEpad
untilthetimeyouwantshowson
thedisplay.
To CancelTimer
Press and hold TIMERON/OFF
pad untilthe word "TIMER"quits
flashingon the display(about4
seconds).
Timer Tones
The timertonebeepsthreetimes
and then is a steadysignalthat
repeatsevery6 secondsuntilyou
press any operation.If you would
like to changethe toneto a set of 3
shortbeeps,press and hold
CLEAR/OFFfor 10 seconds.
Toreturnto onebeepevery6
seconds,pressandhold
CLEAWOFFfor 10seconds.
Display Messages
If "door" appears on the display,
the oven door is in the locked
position.
BAKE, BROIL
and
COOK TIME
cannotbe set if
the door is in the lockedposition.