Seat Assembly - Dynacraft 700C CITY SCAPE PEDAL ASSIST BIKE 8802-46 Owner's Manual

SEAT ASSEMBLY

The seat post must be inserted so that the Minimum Insertion Mark cannot be seen. The quick release mechanism
must be tightened securely to prevent a sudden shift of the seat when riding. Failure to do this may cause loss of
bike control.
Add a little white grease to the inside the seat tube and slide the post into the seat tube, making sure the mini-
mum-insertion mark is hidden. Tighten the quick-release lever. Rotating it clockwise with the lever open will tighten
the clamp, and you lock it into place by pushing firmly on it. It should take some effort to close it, but if you have to
force it, loosen the lever one rotation. The seat can be adjusted in height, angle and distance from the handlebars
to suit the individual rider. Saddle angle is a matter of personal preference but the most comfortable position will
usually be found when the top of the seat is almost parallel to the ground, or slightly raised at the front.
Test to make sure the seatpost is firmly installed by grasping the seat and trying to turn it sideways. If it moves, you
will need to further tighten the quick release.
NOTE: Remember that the Minimum Insertion Mark must remain inside the frame assembly.
17