Using The Charger - Dynacraft 700C CITY SCAPE PEDAL ASSIST BIKE 8802-46 Owner's Manual

HOW TO USE
After powering on the battery and control module, set the pedal assist mode button to the first level. This will be
indicated by the first light being illuminated on the pedal assist level indicator. Make sure you are in a safe open
area to ride before you engage the pedal assist feature. Never engage the pedal assist feature unless you are in a
balanced, ready to ride position with both hands on the handlebar controls. Remember also to always wear a hel-
met! Once ready, simply pedal the bicycle as normal. You will feel the pedal assist motor engage and "boost" you
along. If you stop pedaling, or engage the brake lever, the pedal assist feature will stop automatically.

USING THE CHARGER

The charger should be examined regularly for damage to the cord, plug, enclosure and other parts. In the event
such damage has occurred, the pedal assist bicycle should not be charged until qualified personnel have repaired
the charger or replaced it. Use only the supplied, recommended charger. Always use caution when charging.
The charger is not a toy and should be operated by an adult.
Never operate the charger near flammable materials or liquids, and operate the charger in well-ventilated areas.
Disconnect the charger and unplug it from the pedal assist bicycle when not in use. Do not exceed the recommended
charging time.
Always disconnect the charger from the pedal assist bicycle prior to wiping down or cleaning the pedal assist bicy-
cle with any liquid.
FAILURE TO HEED THE WARNINGS LISTED ABOVE INCREASES RISK OF POTENTIALLY
SERIOUS INJURY. USE THE APPROPRIATE CAUTION WHEN RIDING AND ALWAYS WEAR PROTECTIVE
GEAR.
9