Dynacraft 700C CITY SCAPE PEDAL ASSIST BIKE 8802-46 Owner's Manual page 9

MODE BUTTON
POWER BUTTON
The Power button controls the power supply to the display only. The battery must be turned on or off separately.
When the status is ON, the display will supply the current power and pedal assist levels.
POWER LEVEL INDICATOR
The four LED lights will indicate the current voltage of the battery. When the battery is low, the minimum power
indicator will flash.
WALK BUTTON
When walking your pedal assist bike, you can hold down the walk button. The bike will move along side you at 3.7 MPH. The
red indicator light will light up while the button is held down. Once the button is released, the power assist will be
cancelled.
MODE BUTTON
There are five levels of pedal assist power. When riding the bike, push the MODE button to select the pedal assist
power level. Start off slowly, using the first level of pedal assist until you get a proper feel for the bike and how it
handles in pedal assist mode.
8
POWER BUTTON
WALK BUTTON
POWER LEVEL
INDICATOR
PEDAL ASSIST SENSOR