Dynamic Perception MX3 User Manual page 39

You must always run the Init I/O action after changing the I/O port settings.
You may have more than one I/O port set as an external intervalometer, to take
control from multiple different signals, but this may result in unexpected behavior of
the external devices are not synchronized.
You may not be able to effectively use other Aux I/O lines correctly when the In
Trigger is set to Rising. Notably, limit switch operation will not function correctly
unless the wiring is inverted (use normally closed instead of normally open
switches).
Page 39 of 45
Copyright © 2013 Dynamic Perception LLC
dynamicperception.com
All Contents licensed under the Creative Commons Attribution Share-Alike 3.0 License