Control Screens; Accessing Menus - Dynamic Perception MX3 User Manual

3.2 Control Screens

There are five main control screens:
1. Program Control
2. Camera Control
3. Motor 1 Control
4. Motor 2 Control
5. Motor 3 Control
You may switch screens by pressing the
screen is selected. To select a control on a screen, first press
available control on that screen. Afterwards, pressing
available controls. Once a control is selected, use
control. To stop selecting a control press
More details on the available controls are available in the Main Control Screens section below.

3.4 Accessing Menus

To access the Main System Menu, press
selected. Some controls have specialized menus available to them. To access these menus,
press [Enter] while the control is selected. If the control does not have a specialized menu, the
[Enter] button will bring up the main system menu. Controls which have specialized menus are
documented in the Main Control Screens section below.
[Up] and [Down]
[Up]
[Left] or [Right]
[Enter] on any control screen when no control is
All Contents licensed under the Creative Commons Attribution Share-Alike 3.0 License
buttons, as long as no control on that
[Right] to access the first
[Right] or [Left] switches between
and [Down] to change the value of that
until no control is highlighted.
Copyright © 2013 Dynamic Perception LLC
dynamicperception.com
Page 10 of 45