Front Brake; Check The Level Of The Front Brake Fl Uid - Beta ALP 200 Handbook

4
WARNING:
Fuel is fl ammable and toxic and must be handled with great care. Never work on
the fuel system near heat sources or open fl ames. Always allow the engine to cool
down before working on the fuel system. Wipe off any excess fuel with a rag. Materi-
als soaked in fuel are also fl ammable. In case of ingestion or contact with sensitive
parts of the body immediately seek medical attention. Fuel is to be disposed of as
prescribed by law.

FRONT BRAKE

1
CHECK THE LEVEL OF THE
FRONT BRAKE FLUID
Check the level of the brake fl uid through
sight A. The level of the fl uid should never
fall below the mark in the sight.
To restore the level of the brake fl uid,
loosen the two screws 1, lift cap 2 and
2
A
add brake fl uid until its level is 5 mm
below the upper rim of the reservoir.
Use the liquid indicated on page 16
in the "Recommended lubricants and
liquids" table.
WARNING:
The brake fl uid is extremely corrosive.
Take care not to spill it on the paintwork.
GB
41