Keys; Steering Lock; Helmet Lock - Beta ALP 200 Handbook

KEYS

The vehicle is supplied with two keys (one
key and its spare), for the ignition switch/
steering lock and the helmet lock.
- Turn the key to
- Turn the key to
gine.

STEERING LOCK

To activate the steering lock:
- turn the handlebar counter-clockwise;
- push the key and turn counter-clockwise;
the steering lock is inserted in position A.
Remove the key from this position. The
engine cannot be started.
To deactivate the steering lock:
- turn the key clockwise;
- turn the handlebar clockwise;
From this position, the handlebar is free to
move, the key can be removed and the
engine cannot be started.

HELMET LOCK

Insert the key into the lock located on the
left side under the saddle, and then rotate
it anticlockwise to open the helmet hook.
WARNING: Do not keep the spare keys
in the vehicle.
Keep the keys in a safe and easy-to-reach
place. The code number stamped on the
keys should be copied on this manual (or
elsewhere) so it can be used to ask for
duplicates should both keys be lost.
to start up the engine.
to switch off the en-
21
A
2
GB