Yamaha rivage pm10 Operation Manual page 31

Talkback
Talkback
As a talkback input, you can select any input jack from input patches, as well as the TALKBACK jack
on the top panel of the Control Surface.
TALKBACK Terminal
+48V MASTER
+48V
ON
+48V
METER
ON
2
+
1
AD
HPF
-
3
ANALOG INPUT GAIN
INPUT PATCH
TALKBACK DIMMER
The dimmer function temporarily attenuates the monitor signal level when talkback is on. Two
types of talkback dimmer are provided.
• Talkback dimmer for monitor out
Temporarily attenuates the monitor out volume so that the sound from the monitor speakers
will not interfere with the input of the talkback mic.
• Talkback dimmer for MIX, MATRIX, and STEREO
Temporarily attenuates the volume of each MIX, MATRIX, and STEREO bus output signal so
that excessive output from these buses will not make the talkback inaudible.
ON LEVEL
TALKBACK OUT
MIX 1-72
MATRIX 1-36
STEREO A/B
MONITOR SELECT
INPUT PATCH
ON
31
FAQ
CONTENTS
RIVAGE PM10 Operation Manual