Component Structure - Yamaha rivage pm10 Operation Manual

Component Structure

Component Structure
The RIVAGE PM10 system uses a modular architecture, allowing you to flexibly design a system of
the appropriate size and structure.
The following components are included in the RIVAGE PM10 system.
Control surface
CS-R10
The control surface enables you to perform
general operations on the RIVAGE PM10 system.
(For details, refer to page 5.)
DSP engine
DSP-R10 (5U size) RPio622 (10U size)
The DSP engine handles mixing
and plug-in processing, and all
other audio processing for the
RIVAGE PM10 system.
(For details, refer to page 7.)
The I/O rack transfers analog and
digital audio signals to and from the
DSP engine.
(For details, refer to
I/O rack RY cards
RY16-ML-SILK
This is a 16-channel mic/line input card.
It features SILK digital processing
technology that has been co-developed
by Rupert Neve Designs and Yamaha.
RY16-DA
This card features 16-channel analog
outputs.
RY16-AE
page 8.)
This card features 16-channel digital I/
Os that support the AES/EBU format. A
sampling rate converter is built in for
both inputs and outputs.
(For details on RY cards, refer to
page 9.)
4
FAQ
CONTENTS
HY cards
HY256-TL
This digital I/O card supports
TWINLANe (Yamaha's
proprietary audio transfer
network protocol).
It can handle 256 channels and
be installed in the HY card slot
1.
HY144-D
This digital I/O card supports
the Dante digital audio network.
It can handle 128 channels and
be installed in the HY card slot
2.
(For details on HY cards, refer
to page 9.)
RIVAGE PM10 Operation Manual