Input Channels Mixing Engine section
• Send Point
This allows you to flexibly select the send point for each channel.
With this setting, the signal sent from an input channel to the MIX/MATRIX bus can be made
to follow the PAN of the STEREO bus send regardless of the send point.
Adjacent channels can be paired and used as a stereo module. Either odd-numbered/even-
numbered channels or even-numbered/odd-numbered channels can be specified as a combination.
For a conventional input channel (monaural), the level response of its pan control will be nominal at
center and +3 dB at far left or right.
If channels are paired, the level response of their balance will be nominal at center and +3 dB at far
left or right.
If two channels are paired, all of their parameters except for delay are linked.
The "INPUT CHANNEL LIBRARY" lets you store and recall various input channel parameters.
RIVAGE PM10 Operation Manual