Download  Print this page

Advertisement

Output Channels  Mixing Engine section
MIX1-72
PRE
PRE
PRE
DIMMER
FILTER
EQ
DYNA
8 BAND
HPF
LPF
DYNAMICS
PEQ
TALKBACK
KEY IN
MIX TO STEREO/
MIX TO MATRIX
6
PRE FILTER
PRE DYNA
PRE FADER
POST FADER
POST ON
PRE FILTER
PRE DYNA
PRE FADER
POST FADER
POST ON
6
MIX TO STEREO/MIX TO MATRIX
Signals can be sent from MIX buses 1 – 72 to the STEREO bus or MATRIX buses 1 – 36.
• Send Point
You can select the send destination points for each channel.
PRE
POST
PRE FILTER
POST FADER
PRE EQ
POST ON
PRE DYNA
PRE DELAY
PRE FADER
Pair setting
You can pair adjacent odd/even MIX buses (in that order), and use them as a stereo module. If two
channels are paired, all of their parameters except for delay are linked.
BUS TYPE
MIX buses can be either the FIXED type whose send level is fixed or the VARI type whose send level
is variable; you can switch each odd/even-numbered pair to either type.
Library
The "OUTPUT CHANNEL LIBRARY" lets you store and recall various output channel parameters.
LEVEL/
DCA1-24
PRE
PRE
POST
POST
ON
DELAY
FADER
FADER
ON
DELAY
Max.1000ms
BALANCE
MIX TO STEREO
PRE EQ
ON
LEVEL
PAN/BAL
LCR
PAN LINK
MIX TO MATRIX
PRE EQ
ON
LEVEL
PAN/BAL
BUS TYPE: VARI
To
OUTPUT
PATCH
TO ST
TO MATRIX
(ST)
TO MATRIX
(MONO)
22
FAQ
CONTENTS
RIVAGE PM10 Operation Manual

Advertisement

Table of Contents

   Related Manuals for Yamaha rivage pm10

Comments to this Manuals

Symbols: 0
Latest comments: