4.4. Opening code
The opening code (DTMF) to trigger the relay and open the door is "55" by default. This code can be modified in the
"DoorPhone / DoorPhone / Remote Password" menu. The Opening time , 5 seconds by default, can also be
changed in the menu "DoorPhone / DoorPhone / opening time" :
It is also possible to activate the relay through http command:
http://<IP-Adresse>/cgi-bin/ConfigManApp.com?key=F_LOCK&code=xxxx
The code corresponds to the "Remote Password".
5. Factory reset
To make a factory reset, press the reset button (#) during 5 seconds (see description component page 5)
p.9$|$9$