Step 1. Setup Login - Zoom 4506 User Manual

Click Wizard on the Toolbar to launch the Setup Wizard, which will guide you through the
configuration process.
The Setup Wizard page opens.
Each of the six Steps guides you in configuring a specific setting or group of settings.
When you click Next or Back, you move from one step to another.

Step 1. Setup Login

To view or change configuration settings, you must enter a password. Your router has
a default password (admin) that was set by the factory and that you used to access the
Configuration Manager initially. If you want to keep the default password, click Next to
skip this step. Otherwise, to safeguard your configuration, particularly if you make
changes, we recommend that you change the login password.
1
On the Setup Login Password page, type the old password in the Old Password field.
2
Type the new password in the New Password field.
3
Type the new password in the Reconfirm field, then click Next.
Note: If you forget the new password, you won't have access to the Configuration
Manager and will need to restore the device to its factory settings, thus losing any
changes you made to your router's configuration. To avoid this problem, we
recommend that you write the new password here and also save it in some other
convenient location.
PASSWORD:______________________________________
Chapter 2: Using the Configuration Manager 13