Wep Configuration - Zoom 4506 User Manual

Travel router with wireless-n

Hide thumbs Also See for 4506:

Table of Contents

Field

Entry

Accept the default, B/G/N mixed if the client devices on your network

Wireless Mode

use various wireless standards. Otherwise, select the wireless

standard used by all wireless devices on your network. Having a

single standard will speed up the wireless throughput.

Select WPA-PSK/WPA2 PSK if your devices support both

Authentication

authentication methods. Optionally, select WPA-PSK or WPA2-PSK if

all devices on your network support only one of the authentication

methods.

Select TKIP/AES, which supports dynamic encryption keys using TKIP

Encryption

or AES algorithms. Select AES if you chose WPA2-PSK for the

authentication method. Select TKIP if you chose WPA-PSK for the

authentication method.

In the Preshare Key field enter a value for the key. The maximum

Preshare Key

value is 42 characters. The minimum value is 8 characters.

Write your key in the space below for future reference, and then

enter it in the Preshare Key field:

— — — — — — — — — — — — — — — —

WEP Configuration

Wired Equivalent Privacy (WEP) is a basic encryption method that does not offer the

security strength of WPA or WPA2. Use this method if some of your network's

wireless devices, such as a gaming console, do not support WPA2/WPA.

Important! If you choose to configure your router using WEP encryption, then you

must configure all devices on your wireless network with the same WEP encryption

method and key.

You can configure WEP encryption using the Wireless Setting Page of the Configuration

Manager's Advanced program.

Travel Router with Wireless-N User Manual

Table of Contents