Zoom 4506 User Manual page 8

1
If you are using a mobile broadband USB modem to connect to the Internet, plug the
USB modem into the router's USB port (see 1.1). If you are using a Phone to connect to
the Internet plug one end of the USB cable that came with your phone into the router and
the other end into your phone (see 1.2).
1.1
2
If you don't want to power the router with its rechargeable battery, connect the power
adapter to the receptor on the back panel of your router and plug the other end of the
power adapter into a wall outlet or power strip.
3
Turn on the router's POWER switch, located on the rear panel.
4
The Power indicator on the router's top panel turns on, then the WiFi
blink green. The WiFi
5
After the router is powered up, the router's USB LED should turn solid green within 2
minutes indicating that a mobile broadband connection has been made and that the
router has gotten an IP address. If the USB LED does not turn solid green, unplug the
modem or phone, plug it in again, and wait to see whether the USB LED turns solid green
within 2 minutes. If the USB LED still does not turn and remain solid green, see
Troubleshooting Your Internet Connection below.
®
WiFi LED
8
ON/OFF switch
®
LED continues to blink to signify activity.
Ethernet LED
1.2
POWER jack
USB LED
Travel Router with Wireless-N User Manual
®
and USB LEDs