Markers - Fluke TiX520 User Manual

To enable or disable the Center Box feature:
1. Go to Measurement > Center Box.
2. Push / to highlight ON or OFF.
 
3. Push  to set the new value.
To set the size of the Center Box when enabled:
1. Push / to highlight Set Size.
 
2. Push  to go to the adjustment screen.

3. Push to increase the size of the Center Box.

4. Push to reduce the size of the Center Box.
5. When satisfied with the size of the Center Box, push:
•
 to set the change and exit the menus.
•
 to set the change and go back to the
previous menu.
•
 to cancel the change and go back to the live
view.

Markers

Up to three adjustable, fixed-temperature spot markers are
available on the display. You can use these markers to
highlight a region before you save the image. The marker
selection is set as All Off, One Marker, Two Markers, or
Three Markers.
To set a Marker:
1. Go to Measurement > Markers.
2. Push the / to highlight the function between All
 
OFF, One Marker, Two Markers, and Three
Markers.
3. Push  to set the marker option and go to the
"Move Marker" display. You will see the Move Marker
icon and the labels on the function buttons change to
Done, Next, and Cancel.
To change the Marker position on the display:
 
1. Push to move the Marker location on the
 
image.
2. Push  to highlight the next marker. Do Step 1
again.
3. Do Step 2 for a third marker.
4. Push  when done.
Expert Series Thermal Imager
Menus
25