Spot Markers - Fluke Ti100 User Manual

Spot Markers

Up to three adjustable, fixed-temperature spot markers are available on the
display. You can use these markers to highlight a region before you save the
image. The marker selection is set as All Off, One Marker, Two Markers, or
Three Markers.
To set a Marker:
1. Push V.
2. Push R/S to highlight Measurement.
3. Push U or Y to view the menu.
4. Push R/S to highlight Markers.
5. Push U or Y to view the menu.
6. Push the R/S to highlight the function between All OFF, One
Marker, Two Markers, and Three Markers.
7. Push U or Y to set the marker option and go to the "Move
Marker" display. You will see the Move Marker icon and the labels on the
function buttons change to Done, Next, and Cancel.
To change the Marker position on the display:
1. Push R S X Y to move the Marker location on the image.
2. Push V to highlight the next marker. Do Step 1 again.
3. Do Step 2 for a third marker.
4. Push U when done.
Thermal Imagers
Menus
23