Spot Temperatures; Spot Markers - Fluke Ti300 User Manual

Ti200, Ti300, Ti400
Users Manual

Spot Temperatures

The Spot Temperatures are floating HI and LO temperature indicators that
move on the display as the temperature measurements of the image fluctuate.
To turn on/off the hot and cold spot indicators:
1. Go to Measurement > Spot Temp.
2. Push / to highlight ON or OFF.
3. Push  or  to set the new value.
If the Display is set to Display All, you see the information about
current transmission correction as = xxx%.

Spot Markers

Up to three adjustable, fixed-temperature spot markers are available on the
display. You can use these markers to highlight a region before you save the
image. The marker selection is set as All Off, One Marker, Two Markers, or
Three Markers.
To set a Marker:
1. Go to Measurement > Markers.
2. Push the / to highlight the function between All OFF, One
Marker, Two Markers, and Three Markers.
3. Push  to set the marker option and go to the "Move Marker" display.
You will see the Move Marker icon and the labels on the function buttons
change to Done, Next, and Cancel.
To change the Marker position on the display:
1. Push     to move the Marker location on the image.
2. Push  to highlight the next marker. Do Step 1 again.
3. Do Step 2 for a third marker.
4. Push  when done.
26
Note