Ethernet Power Injector - Watchguard AP100 Hardware Manual

AC Power Adapter
The AC power adapter supplies 12V DC power to the WatchGuard AP and includes US, EU, UK, and AU region-
specific adapter disk plugs.
To connect a region-specific disk plug to the AC power adapter:
1. Insert the round disk plug in the AC power adapter at an angle to align with the slots.
2. Rotate the disk clockwise until it clicks into position.
To remove a disk plug from the AC power adapter:
1. Press the Push button on the round disk plug.
2. Rotate the disk counter-clockwise and pull it away from the adapter.

Ethernet Power Injector

You can also power the WatchGuard AP device with an optional Ethernet Power Injector. This Power over
Ethernet (PoE) device allows you to power the WatchGuard AP through an existing ethernet connection. With
this feature, you do not have to position your WatchGuard AP device near a power outlet.
The Ethernet Power Injector provides 56V/15.4W power over a single 10/100 Ethernet port, and also
includes region-specific plugs (US, EU, UK, AU) for connection to a wall outlet.
This device complies with IEEE 802.3af/at PoE specifications. Do not use any PoE adapters that are not
IEEE 802.3af/at compliant as they may damage your device. This device is to be connected only to PoE
networks without routing to the outside plant.
Hardware Guide
Hardware Specifications
5