Left Trim - HP proone 400 g2 Maintenance & Service Manual

Left trim

To remove the left trim:
1. Prepare the computer for disassembly (see
2. Remove the rear port cover (see
3. Remove the stand (see
4. Remove the access panel (see
5. Remove the top trim (see
6. Remove the system board shield (see
7. Remove the heat sink (see
8. Remove the two Phillips screws that secure the left trim to the computer.
62 Chapter 4 Removal and Replacement Procedures
Preparing to disassemble the computer on page
Rear port cover on page
Attaching and removing a stand on page
Access panel on page
Top trim on page 34).
System board (EMI) shield on page
Heat sink on page 46).
23).
24).
28).
37).
22).