Installing A 2.5-Inch Hard Disc Drive; Replacing The Optical Drive - HP proone 400 g2 Maintenance & Service Manual

20 inch all-in-one
Hide thumbs Also See for proone 400 g2:
Table of Contents

Advertisement

Installing a 2.5-inch hard disc drive

1.
Fasten four mounting screws with grommets onto the 2.5 inch hard drive.
2.
Position the 2.5 inch drive above the drive cage with the connectors facing the power and data cables
next to the drive cage.
3.
Place the 2.5 inch hard drive into the drive cage and slide it toward the cables until the cage snaps into
place.
4.
Connect the power and data cables to the hard drive.

Replacing the optical drive

The optical drive is located beneath the lower hard drive on the left side of the computer. The green latch
comes with the drive.
1.
Prepare the computer for disassembly (see
2.
Remove the rear port cover (see
Preparing to disassemble the computer on page
Rear port cover on page
23).
22).
Drives
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proone 460 g2Proone 480 g2

Table of Contents