Canon iPF600 series Service Manual page 91

Cleaning operation timings are as follows.
Standby 168 hours elapsed capped
At least 720 hours elapsed since the last session of Cleaning 2, 3, 6 or 10 (360 hours after initial
installation)
At initial installation and 96 hours elapsed since the last session of Cleaning 16
1 hour elapsed capped with a specified number of dots discharged per chip completed after last
wiping
Power-on At initial installation
Both heads and inks
available
No heads are available
Power off Specified number of dots discharged per chip completed since the last session of wiping
Before the Less than 168 hours elapsed capped
start of
At least 168 hours elapsed capped
printing
Before printing in the wake of an error occurrence
Printing Before scanning while printing
After the end A specified number of dots (color) discharged per chip since the last session of Cleaning 2, 3, 6 or 1 Cleaning 6 (Normal
of printing
A specified number of dots discharged per chip after the last session of wiping
3 minutes elapsed since the last session of capping
Total 2 hours elapsed uncapped since the last session of Cleaning 1, 2, 3, 6 or 10
When the Manual Cleaning (Head Cleaning A)
Head
Cleaning
Manual cleaning (Head cleaning B)
menu choice
is executed
When the After head replacement
Replace Print
Head menu
choice is
executed
When the After the Move Printer menu choice is executed
Move Printer
menu choice
After power-on at secondary installation
is executed
*1: Quantities of ink consumption by nozzle train
T-2-5
Printer status
The print operation has completed. 168 to 720 hours elapsed capped
At least 720 hours elapsed since the
last session of Cleaning 2, 3, 6 or 10
(360 hours after initial installation)
At least 96 hours elapsed since the
last session of Cleaning 16
At least 1 hour elapsed capped with
a specified number of dots
discharged per chip completed after
last wiping
Print operation aborted (uncapped) Up to 72 hours elapsed after an
and CR error occurring abort
Over 72 hours elapsed after an abort Cleaning 6 (Normal
Print operation aborted (uncapped) and no CR error occurring
T-2-6
Consumption
Cleaning operation
(typ.)*1
Cleaning 1 (Normal 1g
Cleaning)
Cleaning 6 (Normal 5g
(strong) Cleaning)
Cleaning 16 -
(Precipitated ink
agitation)
Wiping + Idle ejection 0.013g
Cleaning 3 (initial filling 15g
ink)
Cleaning 1 (Normal 1g
Cleaning)
Cleaning 6 (Normal 5g
(strong) Cleaning)
Cleaning 16 -
(Precipitated ink
agitation)
Wiping + Idle ejection 0.013g
Cleaning 1 (Normal 1g
Cleaning)
5g
(strong) Cleaning)
Cleaning 11 (ink filling 10g
after head replacement)
Cleaning 10 (ink filling 15g
on secondary transport)
Wiping + Idle ejection 0.013g
Idle ejection 0.013g
Cleaning 1 (Normal 1g
Cleaning)
Cleaning 1 (Normal 1g
Cleaning)
Idle ejection (+Wiping) - (0.013g)
5g
(strong) Cleaning)
Wiping + Idle ejection 0.013g
Wiping + Idle ejection 0.013g
Cleaning 1 (Normal 1g
Cleaning)
Cleaning 1 (Normal 1g
Cleaning)
Cleaning 6 (Normal 5g
(strong) Cleaning)
Cleaning 2 (ink level 10g
adjustment and
cleaning) + Cleaning 4
(ink drainage for head
replacement)
Cleaning 5 (ink drainage 10g
for secondary transport)
After power-on at 15g
secondary installation
Chapter 2
2-25