Canon iPF600 series Service Manual page 163

1) Remove the cutter unit.
2) Remove the belt[1], two screws[2], and harness, and then remove the cutter lifter unit[3].
d) Removing the cutter drive unit
1) Remove the cutter unit.
2) Remove two screws[1] and two connectors[2] and free the harness from harness guide [3] to remove cutter drive unit[4].
[2]
[3]
F-4-35
[4] [3]
[1] [2]
F-4-36
[1]
Chapter 4
4-15