Canon iPF600 series Service Manual page 138

Chapter 3
(3) Use the Wrench [1] to tighten the hex screws on both sides and secure the Stand Stay [2].
(4) Hook the Table Stay [1] on the Stand Stay [2] and tighten the Table Stay Bolt [4] with the Allen Wrench [3].
(5) Insert one Basket Rod #1 [1] into the hole of the Basket Fastener R [2] so that the hole of Basket Rod #1 [1] is aligned with the hole of the Basket Fastener R [2].
3-10
[1]
[2]
F-3-33
[1]
F-3-34
[1]
[4]
[1]
[2]
F-3-35
[3]
[2]
[3]
[4]