Walgreens Premium Arm WGNBPA-550 Instruction Book page 12

2. With the cuff wrapped around your arm, press the
START/STOP button. Do not inflate the cuff unless it is
wrapped around your arm. All digits will light up to check
the display functions. The checking procedure will be
completed after about 3 seconds.
START
3
STOP
Note: If using the Voice Assist™ "Instructions On" mode,
you will be prompted to press the START/STOP
button again before measurement begins.
3. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to start measurement.
WGNBPA-550.indd 23-24 WGNBPA-550.indd 23-24
SYS.
mmHg
AM
PM
DIA.
mmHg
Pulse
/min.
21
4. The cuff will begin deflating as measurement continues.
Note: This monitor will re-inflate automatically if the system
detects that your body requires more pressure for
measurement.
5. When the measurement is
completed, the cuff will deflate
entirely. Systolic pressure, diastolic
pressure and pulse will be shown
simultaneously on the LCD
screen. The measurement is then
automatically stored into memory.
Note:
1. This monitor automatically returns to clock mode
approximately 30 seconds after last operation. You may
also press the START/STOP button to return to clock
mode.
2. To interrupt the measurement, you may press the
START/STOP (recommended), "M," "Language,"
"Talking Mode," User- Select or Date & Time Set ( )
buttons. The cuff will deflate immediately after a button
is pressed.
SYS.
mmHg
DIA.
mmHg
Pulse
/min.
22
11/9/09 1:57 PM 11/9/09 1:57 PM