Date & Time Set Procedure; Using The Voice Assist™ Talking Function - Walgreens Premium Arm WGNBPA-550 Instruction Book

DATE & TIME SET PROCEDURE
1. To adjust the date/time, press
the Set button .
2. The display will show a blinking number showing
the YEAR. Change the YEAR by pressing the
button. Each press will increase the number by one
in a cycling manner. Press the Set button
to confirm the entry, and the screen will show a
blinking number representing the MONTH.
3. Change the MONTH, DAY, HOUR and MINUTE
as described in Step 2 above, using the
to change the numbers and the Set button
confirm the entries.
(Please note that year does not appear on the display.)
repeat process to set MONTH, DAY,
HOUR and MINUTE
WGNBPA-550.indd 15-16 WGNBPA-550.indd 15-16
again
button
to
Press the button
blinking YEAR
increasing YEAR
confirm the entry
13
CLOCK FUNCTION
This blood pressure monitor features a clock that displays
the time when the monitor is not in use. The clock is
automatically set when time and date are set.
USING THE VOICE ASSIST™ TALKING FUNCTION
The Voice Assist feature will guide you through the
measurement procedure and also announce results after
your reading. The Voice Assist talking function is not a
substitute for reading and understanding the instruction
manual.
The Voice Assist feature has 3 modes:
• Instructions On Mode - Announces instructions
and results
• Instructions Off Mode - Announces results only
• Quiet Mode - No voice
Setting the Voice Assist Mode:
1. Press the Talking mode button on the
back of the monitor. Each press of the Talking Mode
button will cycle through the different modes.
2. When the appears with the letters
"InS ON," this indicates the monitor is in
"Instructions On" Mode.
14
11/9/09 1:57 PM 11/9/09 1:57 PM