Raymarine RC435 Owner's Handbook Manual page 63

Chapter 5: Operation
➤ To edit a waypoint using the Waypoint List:
1. From chart mode, press ENTER to display the primary function bar.
FIND SHIP
OBJECT
INFO
2. Using trackpad left/right, select WAYPOINTS.
PLACE WPT
AT CURSOR
3. Select WAYPOINT LIST; the Waypoint List is displayed, with its associ-
ated function bar.
4. Select EDIT WAYPOINT; the waypoint edit functions are displayed.
5. To edit the waypoint name, select EDIT NAME; the cursor is placed in
the name field of the selected waypoint.
i. Edit the name as previously described (up to eight characters).
6. To edit the waypoint symbol, select EDIT SYMBOL.
i. Use trackpad left/right to highlight the desired symbol.
ii. Press ENTER to accept the choice or CLEAR to abort the operation.
7. To change the waypoint's position, select EDIT POSITION. The cursor
is placed in the Position field in the Waypoint List.
i. Use trackpad left/right to select the latitude/longitude fields.
ii. Use trackpad up/down to scroll through and edit the values.
iii.When editing is complete, press ENTER to save the new position
or CLEAR to abort the operation.
ROUTES WAYPOINTS
ARCHIVES MORE¬
PLACE WPT PLACE WPT
AT VESSEL AT POS
53
MORE¬
D6233-1
WAYPOINT
LIST
D6236-1
D4692-1
D4675-1